Picture 1 |
![]() |
Make a slight upward thrust on the instrument, lever with a screwdriver on the left hook tongue |
Picture 2 |
![]() |
Keeping the thrust upward on the instrument, Lever with a screwdriver on the tongue of the right hook, until the instrument is completely unlocked |
Picture 3 | |
![]() | ![]() |
Rotate and lift upwards….. |
Picture 4 |
![]() |
…..until the complete release from the DIN rail |
Picture 5 |
![]() |
Remove the instrument from the DIN rail (1), lifting in vertical direction (2) |
Picture 6 |
![]() |
Attach the instrument to the DIN rail (1), and rotate it to the DIN guide (2)… |
Picture 7 |
![]() |
…Press until the hooks are clicked |