AN025 - Application's update procedure with MMC/SD on R401
 |
|||
| Document | AN025 | ||
|---|---|---|---|
| Description | Application's update procedure with MMC/SD on R401 | ||
| Drawn up | Omar Sbalchiero | ||
| Approved | Gabriele Bazzi | ||
| Link | http://www.qem.eu/doku/doku.php/en/appnote/an025 | ||
| Language | Italiano | ||
| Document Release | Description | Note | Date |
| 01 | New manual | 13/02/2015 | |
Premise
Before updating the application from MMC there are some conditions to be fulfilled:
-
The MMC must be formatted with filesystem type FAT12, FAT16 or FAT32;
-
Before you copy the files in MMC format it is recommended.
-
The file must be nominated:
applic.bin
Procedure
-
Format MMC/SD card
-
Copy the files sent into the SD/MMC card
-
Insert MMC/SD card in the PLC
-
Power Up the PLC with FUNC button
pressed
-
Keep FUNC button pressed till the activation of LED L1 fix
-
Press several times FUNC button till the activation of LED L1 and L3 both
-
Press BOOT button to start function
-
Please wait about 3 minutes till the deactivation of L1 and L3 led, then wait for activation of POWER and RUN led
-
Power Down. Pull out the MMC/SD. Power Up the PLC
