n. | Led ON | System function | PWD | Description |
1 | L1 | 01 - Reset Error Checksum | - | Reset checksum error.
N.B.: if there is this error, the L1 led flashing. |
2 | L2 | 02 - Copy all files DEVICE → NAND | - | Copy all files from the selected DEVICE to the NAND Flash |
3 | L1
L2 | 03 - Copy all files NAND → DEVICE | - | Copy all files from the NAND Flash to the selected DEVICE |
4 | L3 | 04 - Application delete | - | Erase l'applicazione. |
5 | L1
L3 | 05 - Application upload from DEVICE | - | Upload the application from the selected DEVICE. |
6 | L2
L3 | 06 - Set Date & Time | - | Not active for this hardware |
7 | L1
L2
L3 | 07 - Downl. retentive data to DEVICE | - | Save the retentive data on the selected DEVICE. |
8 | L4 | 08 - Set NEW Password | - | Not active for this hardware |
9 | L1
L4 | 09 - Remove all files from NAND Flash | - | Erase all files on the NAND Flash. |
10 | L2
L4 | 10 - Show NAND Flash files | - | Not active for this hardware |
11 | L1
L2
L4 | 11 - Touch Calibration | - | Not active for this hardware |
12 | L3
L4 | 12 - Set Ethernet communic. parameter | - | Not active for this hardware |
13 | L1
L3
L4 | 13 - Backup to NAND | - | QCL, QTP and Data backup operation on the NAND. |
14 | L2
L3
L4 | 14 - Restore from NAND | - | QCL, QTP, and Data restore operation from the NAND. |