en:lib:mdl:mdl-f-fsproced-020

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

en:lib:mdl:mdl-f-fsproced-020 [2015/11/04 11:51] – created qem207en:lib:mdl:mdl-f-fsproced-020 [2019/08/29 17:01] (current) – external edit 127.0.0.1
Line 1: Line 1:
 +^:tip:^To access the **System Functions**, start up the controller with **FUNC** button pressed.^
  
 +The QMOVE application, if present, it not executed and the led **L1** lights up.
 +
 +^:tip:^Use **FUNC** button to scroll through the functions.\\ The selected function is indicated by the combination of **L1-L2-L3-L4** leds lighted up.^
 +
 +The "System Functions" table gives the list of system functions and related led combinations.
 +
 +^:tip:^Press **BOOT** button for 2 seconds to execute the selected function.\\ The **POW** led starts flashing to indicate that the selected function is being executed.^
 +
 +When the function ends the **POW** led stops flashing.
 +
 +^:tip:^Press **FUNC** button to restart the controller.^
 +
 +If the function does not complete properly the **POW** stops and the **ERR** starts flashing.
 +
 +The number of flashes indicates the type of error as shown in the table [[#System Function Error Messages]].