Differences

This shows you the differences between two versions of the page.

--- en:lib:mdl:mdl-f-fsrstnan-010 [2015/10/20 09:06] – qem207
+++ en:lib:mdl:mdl-f-fsrstnan-010 [2019/08/29 17:01] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
+===Restore from NAND===
+The restore procedure allows to recover from the NAND mass storage, the saved backup files of the QCL and HMI applications and an dump of the retentive data.
+{{sezioni:funzionamento:schermata_res-from-nand_01.png?nolink&400}}
+The procedure :
+  *The message "Restore NAND backup" is given.
+  *The NAND backup file of the QCL Application is read: **applic.qcy**\\ The message "Upload QCL application" is given, the percentage progress of the operation and the procedure step number.
+  *The NAND backup file of the QCL Application retentive data is read : **appdat.qcy**\\ The message  "Upload retentive data" is given, the percentage progress of the operation.
+  *If the controller has a display, the presence of the HMI application is checked and read from the NAND back up file: **appqtp.qcy.**\\ The message  "Upload HMI application" is given, the percentage progress of the operation and the procedure step number
+  *Procedure end and system reboot.