Differences

This shows you the differences between two versions of the page.

--- en:lib:mdl:mdl-h-ceaninp-090 [2015/05/05 17:16] – documentazione
+++ en:lib:mdl:mdl-h-ceaninp-090 [2019/08/29 17:01] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
+/*==== - Ingresso analogico in configurazione Termocoppia ====*/
+|Sensor type |  Thermocouple type J,K,R,S,B,N,T,E [(J and K only supported by SW. Contact QEM for the support of the other sensor types.)]  |
+|Type of measure |  Differential voltage  |
+|Resolution |  16 bit  |
+|Measuring range|  ±156.25 mV  |
+|Measure for cold junction compensation |  Integrated  |
+|Input resistance (Rin) |  15 MO  |
+|Value of damage |  30V  |
+|Measurement accuracy |  ± 0,2% (excluding cold junction compensation)|
+|Conversion time|  It depends on the configuration of the analog input.\\ See section [[# Conversion times]] if present [(The sampling time of the device must be equal or higher than the conversion time)]  |
+|Isolation|  1000 Vrms  |
+~~REFNOTES~~