| SW1 | Dip | DIP settings | Function | |||
|---|---|---|---|---|---|---|
 | 1 | OFF | OFF | ON | ON | Select PROG PORT transmission speed |
| 2 | OFF | ON | OFF | ON | ||
| Baud-rate 38400 | Baud-rate 115200 | Baud-rate 19200 | Baud-rate 57600 |
|||
| 3 | OFF | OFF | ON | ON | Select USER PORT transmission speed | |
| 4 | OFF | ON | OFF | ON | ||
| Baud-rate 38400 | Baud-rate 115200 | Baud-rate 19200 | Baud-rate 57600 |
|||
| 5 | CANbus baud-rate selector. See paragraph CANbus baud-rate selector | |||||
| 6 | OFF | ON | Select PROG PORT functioning mode | |||
| PROG PORT can also be used by SERCOM and MODBUS devices | PROG PORT cannot be used by SERCOM and MODBUS devices | |||||
| 7 | CANbus baud-rate selector. See paragraph CANbus baud-rate selector | |||||
| 8 | OFF | ON | Select the USER PORT as PROG PORT1) | |||
| PROG PORT normal | PROG PORT on USER PORT connector | |||||
1)
It is possible to use the USER PORT connector as PROG PORT with RS232 electric standard, doing this the mini-USB connector of the PROG PORT is disconnected (Setting USER PORT electric standard). For this function mode also set dip 6 of SW2 to OFF.