Differences

This shows you the differences between two versions of the page.

--- en:lib:tpl:tpl-f-fsproced-010 [2015/11/04 09:07] – qem207
+++ en:lib:tpl:tpl-f-fsproced-010 [2019/08/29 17:01] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
+^:tip:^To access the **System Functions**, start up the controller with **FUNC** button or **F1** key pressed.^
+The QMOVE application, if present, it not executed and the led **L1** lights up.\\
+Tools that have a display appears **"SYSTEM FUNCTIONS"**.
+{{sezioni:funzionamento:schermata_funzioni1_0@page@.png?nolink&400}}
+^:tip:^Use **FUNC** button or **F1** key to scroll through the functions.\\ The selected function is indicated by the combination of **L1-L2-L3-L4** leds lighted up and in instruments that have a display, you see the selected function in the "SYSTEM FUNCTIONS".^
+{{sezioni:funzionamento:schermata_funzioni2_0@page@.png?nolink&400}}
+The "System Functions" table gives the list of system functions and related led combinations.
+^:tip:^Press **BOOT** button or **@key@** key for 2 seconds to execute the selected function.\\ The **POW** led starts flashing to indicate that the selected function is being executed.^
+Instruments that have a display, you see the page "SYSTEM FUNCTIONS" as in the figure below.
+{{sezioni:funzionamento:schermata_funzioni3_01.png?nolink&400}}
+When the function ends the **POW** led stops flashing.\\
+Instruments that have a display, you see the page "SYSTEM FUNCTIONS" as in the figure below.
+{{sezioni:funzionamento:schermata_funzioni4_01.png?nolink&400}}
+^:tip:^Press **FUNC** button or **F1** key to restart the controller.^
+If the function does not complete properly the **POW** stops and the **ERR** starts flashing.
+{{sezioni:funzionamento:schermata_funzioni5_01.png?nolink&400}}
+The number of flashes indicates the type of error as shown in the table [[#System Function Error Messages]].