Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision | |||
| en:strumenti:accessori:iq011 [2016/09/15 15:07] – [1. IQ011 - MMC interface] qem103 | en:strumenti:accessori:iq011 [2019/08/29 17:01] (current) – external edit 127.0.0.1 | ||
|---|---|---|---|
| Line 1: | Line 1: | ||
| + | ====== IQ011 - MMC interface ====== | ||
| + | {{strumenti: | ||
| + | ===== - General features ===== | ||
| + | * DIN 43700 standard container, format 36x72 mm, deep 72 mm | ||
| + | * Hole template 32x67 mm | ||
| + | * Slot for Multi Media Card (MMC) | ||
| + | * Extension cable with suitable insert MMC shaped termination on board readers for MMC | ||
| + | |||
| + | ===== - MMC features ===== | ||
| + | ==== - Mechanics: ==== | ||
| + | |||
| + | |Dimensions (mm)|24 x 32 x 1.4| | ||
| + | |Accessory|Protection on the left side| | ||
| + | |Duration|10000 inserts| | ||
| + | |Working temperature|da -20° a +85° C| | ||
| + | |Storage temperature|da -40° a +85° C| | ||
| + | |Print area label|All except the contact area\\ (ess than 5 mm from the edge)| | ||
| + | |||
| + | ==== - Electrical: ==== | ||
| + | |||
| + | |Type|Flash| | ||
| + | |Capacity|16/ | ||
| + | |Access mode|To linear addressing, | ||
| + | |||
| + | ===== - Bus features ===== | ||
| + | |||
| + | |Type|3-wire serial synchronous high speed| | ||
| + | |Speed read|up to 20 Mbit/s| | ||
| + | |Speed write|up to a 1.6 MBYTE/Sec| | ||
| + | |Access time|< 3ms| | ||
| + | |Hot insertion|Yes| | ||
| + | |Pins number|7| | ||
| + | |Operation mode|Card identification, | ||