Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
en:strumenti:qmoveplus:j1p51:mimj1p51fx_base [2016/08/29 15:33] qem103en:strumenti:qmoveplus:j1p51:mimj1p51fx_base [2019/10/31 16:39] (current) qem103
Line 18: Line 18:
 ^ Editor:                                         | Riccardo Furlato                                                                                                                                     |||| ^ Editor:                                         | Riccardo Furlato                                                                                                                                     ||||
 ^ Approver                                        | Gabriele Bazzi                                                                                                                                       |||| ^ Approver                                        | Gabriele Bazzi                                                                                                                                       ||||
-^ Link:                                              | http://www.qem.eu/doku/doku.php/strumenti/qmoveplus/j1p51/mimj1p51fx_base                                                                            ||||+^ Link:                                              | http://www.qem.eu/doku/doku.php/en/strumenti/qmoveplus/j1p51/mimj1p51fx_base                                                                            ||||
 ^ Language:                                            | English                                                                                                                                             |||| ^ Language:                                            | English                                                                                                                                             ||||
 |                                                                                                                                                                                                          ||||| |                                                                                                                                                                                                          |||||
Line 105: Line 105:
 ==== - Firmware versions ==== ==== - Firmware versions ====
  
-^Version^Description^ +{{page>en:lib:mdl:mdl-f-firmvers-010}}
-|  10  |Fully programmable with PLC functions| +
-|  20  |Fully programmable with PLC and Motion control functions| +
-|  30  |Fully programmable with PLC, Motion control, Camming and Interpolation functions| +
- +
-For more details about the firmware, consult [[software:devices#Devices abilitati negli strumenti]].+
  
 <html><pagebreak /></html> <html><pagebreak /></html>
Line 174: Line 169:
 ===== - Hole template ===== ===== - Hole template =====
  
-{{strumenti:qmoveplus:j1p51:j1p51_dima.png?nolink&650 |}}+{{strumenti:qmoveplus:j1p51:j1p51_dima.png?nolink&650}}
  
 <html><pagebreak /></html> <html><pagebreak /></html>
Line 186: Line 181:
 ====== - Base card wiring ====== ====== - Base card wiring ======
  
-^:tip:^For details about cable sections and connectors, see application note [[appnote:an021|AN021]]^+^:tip:^For details about cable sections and connectors, see application note [[en:appnote:an021|AN021]]^
  
 {{strumenti:qmoveplus:j1p51:j1p51_slot2_01.png?nolink&750}} {{strumenti:qmoveplus:j1p51:j1p51_slot2_01.png?nolink&750}}
Line 412: Line 407:
 The firmware version **10** include following device: The firmware version **10** include following device:
 ^Device name^Minimum sampling\\ time (msec)^Maximum sampling\\ time (msec)^Execution time (%)^ ^Device name^Minimum sampling\\ time (msec)^Maximum sampling\\ time (msec)^Execution time (%)^
-|[[Software:devices:ABSCNT]]|1|250|8,31| +|[[en:Software:devices:ABSCNT]]|1|250|8,31| 
-|[[Software:devices:ANINP]]|1|250|14,25| +|[[en:Software:devices:ANINP]]|1|250|14,25| 
-|[[Software:devices:CALENDAR]]|-|-|0| +|[[en:Software:devices:CALENDAR]]|-|-|0| 
-|[[Software:devices:CANOPEN]]|1|250|100| +|[[en:Software:devices:CANOPEN]]|1|250|100| 
-|[[Software:devices:COUNTER3]]|1|250|5,94| +|[[en:Software:devices:COUNTER3]]|1|250|5,94| 
-|[[Software:devices:DAC]]|-|-|0| +|[[en:Software:devices:DAC]]|-|-|0| 
-|[[Software:devices:DATASTORE]]|1|20|90,5| +|[[en:Software:devices:DATASTORE]]|1|20|90,5| 
-|[[Software:devices:FREQ]]|1|250|4,75| +|[[en:Software:devices:FREQ]]|1|250|4,75| 
-|[[Software:devices:MMIQ2]]|1|10|90,5| +|[[en:Software:devices:MMIQ2]]|1|10|90,5| 
-|[[Software:devices:MODBUS]]|1|250|32,07| +|[[en:Software:devices:MODBUS]]|1|250|32,07| 
-|[[Software:devices:QMOS]]|-|-|0| +|[[en:Software:devices:QMOS]]|-|-|0| 
-|[[Software:devices:RECDATA]]|1|250|5,34| +|[[en:Software:devices:RECDATA]]|1|250|5,34| 
-|[[Software:devices:SERCOM]]|1|250|9,26|+|[[en:Software:devices:SERCOM]]|1|250|9,26|
  
 The firmware version **20** include also following device: The firmware version **20** include also following device:
 ^Device name^Minimum sampling\\ time (msec)^Maximum sampling\\ time (msec)^Execution time (%)^ ^Device name^Minimum sampling\\ time (msec)^Maximum sampling\\ time (msec)^Execution time (%)^
-|[[Software:devices:ANPOS2]]|1|250|8,31| +|[[en:Software:devices:ANPOS2]]|1|250|8,31| 
-|[[Software:devices:EANPOS]]|1|250|55,94| +|[[en:Software:devices:EANPOS]]|1|250|55,94| 
-|[[Software:devices:HEAD2]]|1|250|23,75| +|[[en:Software:devices:HEAD2]]|1|250|23,75| 
-|[[Software:devices:OOPOS3]]|1|250|27,91|+|[[en:Software:devices:OOPOS3]]|1|250|27,91|
  
 The firmware version **30** include also following device: The firmware version **30** include also following device:
 ^Device name^Minimum sampling\\ time (msec)^Maximum sampling\\ time (msec)^Execution time (%)^ ^Device name^Minimum sampling\\ time (msec)^Maximum sampling\\ time (msec)^Execution time (%)^
-|[[Software:devices:CAMMING3]]|1|250|55,94| +|[[en:Software:devices:CAMMING3]]|1|250|55,94| 
-|[[Software:devices:INTERP]]|1|250|35,63| +|[[en:Software:devices:INTERP]]|1|250|35,63| 
-|[[Software:devices:JOINT]][(The actual sampling time is double respects set)]|1|250|95,01|+|[[en:Software:devices:JOINT]][(The actual sampling time is double respects set)]|1|250|95,01|
 ~~REFNOTES~~ ~~REFNOTES~~
  
Line 445: Line 440:
  
 == - CANOPEN == == - CANOPEN ==
-If in the device declaration [[Software:devices:CANOPEN]] set the 0 speed then it becomes can be set by means of SW1 dip.\\ +If in the device declaration [[en:Software:devices:CANOPEN]] set the 0 speed then it becomes can be set by means of SW1 dip.\\ 
 The first slot of the target resources that reside within the Canopen is the 4.\\ The first slot of the target resources that reside within the Canopen is the 4.\\
 The firmware capture the input interrupt while this is located in a Canopen module.\\ The firmware capture the input interrupt while this is located in a Canopen module.\\
Line 452: Line 447:
 == - DATASTORE == == - DATASTORE ==
  
-The files used from the device [[Software:devices:DATASTORE]] sare contain in the /DS folder. If this folder does not exist it is created automatically.\\ +The files used from the device [[en:Software:devices:DATASTORE]] sare contain in the /DS folder. If this folder does not exist it is created automatically.\\ 
-The [[Software:devices:DATASTORE]] pdevice can can operate with MMC/SD or USB NAND memory inside the product (not removable). To define how your device used the parameter value priority (0=MMC/SD, 1=NAND, 2=USB). If your application needs to frequently access to the MMC/SD or USB device and do not require physical removal, you can use a particular priority parameter setting that avoids continually MOUNT UMOUNT devices. Before execute the UMOUNT command to set the “priority = -1”.+The [[en:Software:devices:DATASTORE]] pdevice can can operate with MMC/SD or USB NAND memory inside the product (not removable). To define how your device used the parameter value priority (0=MMC/SD, 1=NAND, 2=USB). If your application needs to frequently access to the MMC/SD or USB device and do not require physical removal, you can use a particular priority parameter setting that avoids continually MOUNT UMOUNT devices. Before execute the UMOUNT command to set the “priority = -1”.
  
 A QCL code example to change device may be: A QCL code example to change device may be:
Line 499: Line 494:
 == - FREQ == == - FREQ ==
  
-To define the input associated to the device [[Software:devices:FREQ]] use the appropriate numeric field on the device. The availability of frequency inputs must be verified with the hardware version of the product. To derive the relationship between numerical value and terminal pin use the information in the “address” column in the tables in the illustration of the terminal. +To define the input associated to the device [[en:Software:devices:FREQ]] use the appropriate numeric field on the device. The availability of frequency inputs must be verified with the hardware version of the product. To derive the relationship between numerical value and terminal pin use the information in the “address” column in the tables in the illustration of the terminal. 
  
 == - CAMMING3 == == - CAMMING3 ==
Line 507: Line 502:
 <html><pagebreak /></html> <html><pagebreak /></html>
  
-====== - Accessori disponibili ======+====== - Accessories available ====== 
   * [[en:Strumenti:Accessori:IQ009]]   * [[en:Strumenti:Accessori:IQ009]]
   * [[en:Strumenti:Accessori:IQ013]]   * [[en:Strumenti:Accessori:IQ013]]
   * [[en:Strumenti:Accessori:IQ011]]   * [[en:Strumenti:Accessori:IQ011]]
   * [[en:Strumenti:Accessori:IQ016]]   * [[en:Strumenti:Accessori:IQ016]]
-  * [[en:Strumenti:Accessori:kit polarizzazione connettori|Kit per la polarizzazione dei connettori]] +  * [[en:Strumenti:Accessori:kit polarizzazione connettori|Connectors polarization Kit]] 
-  * [[en:Strumenti:Accessori:kit personalizzazione pannello|Kit di personalizzazione del pannello anteriore]]+  * [[en:Strumenti:Accessori:kit personalizzazione pannello|Front panel customization kit]]
  • Last modified: 2019/08/29 17:19