| |
en:strumenti:qpanelplus:qc050:mima1hmiqc050 [2016/09/21 15:48] – [7.3.3.1. Funzione Delete App.] qem103 | en:strumenti:qpanelplus:qc050:mima1hmiqc050 [2019/08/29 17:01] (current) – external edit 127.0.0.1 |
---|
====== - Description ====== | ====== - Description ====== |
| |
**A1-HMI-QC050** s a operator panel of the Qpanel+ series, can be equipped with: | **A1-HMI-QC050** is a operator panel of the Qpanel+ series, can be equipped with: |
| |
^ Standard equipment || | ^ Standard equipment || |
| | | | | | | | |**24** = Power supply 24Vdc| | | | | | | | | | |**24** = Power supply 24Vdc| |
| | | | | | |**D08** = Specialization cards||| | | | | | | | |**D08** = Specialization cards||| |
| | | | |**TP00** = Keyboard code (TP00 = resisitive touch-screen panel, logo and customizable function keys);;\\ **TP01** = resisitive touch-screen panel, logo and QEM function keys||||| | | | | | |**TP00** = Keyboard code (TP00 = resisitive touch-screen panel, logo and customizable function keys);\\ **TP01** = resisitive touch-screen panel, logo and QEM function keys||||| |
| | |**01** = Firmware version (00 = not installed)||||||| | | | |**01** = Firmware version (00 = not installed)||||||| |
|**A1** = HMI family\\ **HMI** = Human Machine Interface\\ **Q** = Qpanel series\\ **C** = Panel Graphic colors\\ **050** = Graphics LCD display 5” TFT-256 COLORS-800x480px; front panel dimensions (168x144mm); keyboard with 7 keys + 11 leds; box with standard DIN 43700||||||||| | |**A1** = HMI family\\ **HMI** = Human Machine Interface\\ **Q** = Qpanel series\\ **C** = Panel Graphic colors\\ **050** = Graphics LCD display 5” TFT-256 COLORS-800x480px; front panel dimensions (168x144mm); keyboard with 7 keys + 11 leds; box with standard DIN 43700||||||||| |
===== - Leds ===== | ===== - Leds ===== |
| |
The **"key, com, state, error"** leds re called system led, they are found on both the front panel and on the back of HMI. | The **"key, com, state, error"** leds are called system led, they are found on both the front panel and on the back of HMI. |
| |
{{led:qc070_led_sistema-front_01.png?direct&280}} | {{led:qc070_led_sistema-front_01.png?direct&280}} |
| |
The user **"L1, L2, L3 **e** L4"** leds they are found only on the front panel: | The user **"L1, L2, L3 **and** L4"** leds they are found only on the front panel: |
| |
{{led:qc070_led_utente-retro_01.png?direct&280}} | {{led:qc070_led_utente-retro_01.png?direct&280}} |
* **d** = indicates that the function was successful. | * **d** = indicates that the function was successful. |
| |
=== - Funzione Upload MMC === | === - Upload MMC function === |
| |
{{strumenti:qpanelplus:qpanelplus_funzioni_sistema_02.png?450|}} | {{strumenti:qpanelplus:qpanelplus_funzioni_sistema_02.png?450|}} |
| |
|Premendo il **pulsante BOOT/tasto F5** per 2 secondi la funzione selezionata viene eseguita.|{{tasti:f5.png?40}}\\ {{varie:pulsante_6x6.jpg?40}}**BOOT**| | |Press the **BOOT key/F5 key** for 2 seconds the selected function is executed.|{{tasti:f5.png?40}}\\ {{varie:pulsante_6x6.jpg?40}}**BOOT**| |
|Il led POW inizia a lampeggiare ad indicare che la funzione selezionata è in esecuzione.|{{led:led_lamp.jpg?20}} **POW**| | |The POW led starts flashing to indicate that the selected function is running.|{{led:led_lamp.jpg?20}} **POW**| |
|Quando l'esecuzione della funzione termina il led POW smette di lampeggiare.|{{led:led_off.jpg?20}} **POW**| | |When the function ends the POW led stops flashing.|{{led:led_off.jpg?20}} **POW**| |
|Premendo il **pulsante FUNC/tasto F1** si esce dalla funzione|{{tasti:tasto_f1.png?40}}\\ {{varie:pulsante_6x6.jpg?40}}**FUNC**| | |Press the **FUNC key/F1 key** to exit from the function|{{tasti:tasto_f1.png?40}}\\ {{varie:pulsante_6x6.jpg?40}}**FUNC**| |
| |
{{strumenti:qpanelplus:qpanelplus_funzioni_sistema_04.png?450}} | {{strumenti:qpanelplus:qpanelplus_funzioni_sistema_04.png?450}} |
| |
* **a** = indica che la funzione di sistema è in esecuzione. | * **a** = indicates that the system is running. |
* **b** = operazione in esecuzione. | * **b** = operation running. |
* **c** = percentuale della funzione eseguita. | * **c** = percentage of function executed. |
| |
{{strumenti:qpanelplus:qpanelplus_funzioni_sistema_05.png?450}} | {{strumenti:qpanelplus:qpanelplus_funzioni_sistema_05.png?450}} |
| |
* **d** = indica che la funzione è stata eseguita correttamente. | * **d** = indicates that the function was successful. |
| |
|Premendo il **pulsante FUNC/tasto F1** lo strumento si riavvia.|{{tasti:tasto_f1.png?40}}\\ {{varie:pulsante_6x6.jpg?40}}**FUNC**| | |Press the **FUNC key/F1 key** the instrument restars.|{{tasti:tasto_f1.png?40}}\\ {{varie:pulsante_6x6.jpg?40}}**FUNC**| |
| |
|Se l'esecuzione della funzione non va a buon fine si spegne il led **POW** e inizia a lampeggiare il led **ERR**..|{{led:led_off.jpg?20}} POW\\ {{led:led_lamp.jpg?20}} **ERR**| | |f the function is not successful **POW** led turns OFF and start the **ERR** led.|{{led:led_off.jpg?20}} POW\\ {{led:led_lamp.jpg?20}} **ERR**| |
| |
{{:strumenti:qpanelplus:qpanelplus_funzioni_sistema_06.png?450}} | {{:strumenti:qpanelplus:qpanelplus_funzioni_sistema_06.png?450}} |
| |
* **e** = operazione che ha originato l'errore. | * **e** = operation that caused the error. |
* **f** = indica il tipo di errore avvenuto. | * **f** = indicates the type of error occurred. |
| |
Il numero di lampeggi indica il tipo di errore avvenuto come riportato nella tabella [[#Messaggi di errore delle Funzioni di sistema]]. | The number of flashes indicates the type of error occurred as shown in table [[#Error messages of system functions]]. |
| |
=== - Funzione Touch Calib. === | === - Touch Calib. function === |
Questa procedura, presente solo sugli strumenti con touch-screen. | |
Serve a tarare il dispositivo di puntamento. | |
| |
|{{sezioni:funzionamento:schermata_touch1_01.png?nolink&400}}|All'ingresso della procedura, viene presentata una schermata in cui è presente una croce di colore blu.\\ Premere il centro della croce fino a quando la barra di progressione ha raggiunto il completamento.| | This procedure, only available on instruments with touch-screen. Need to calibrate the pointing device. |
| |
|{{sezioni:funzionamento:schermata_touch2_01.png?nolink&400}}|A questo punto, compare la scritta ''**"COMPLETED"**'' ed è possibile rilasciare la pressione.\\ \\ \\ \\ \\ //**Nota: se la pressione viene rilasciata prima del completamento della barra di progressione, la procedura viene abortita e compare la scritta**// **''<wrap rosso>"!! OPERATION ABORTED !!"</wrap>''**| | |{{sezioni:funzionamento:schermata_touch1_01.png?nolink&400}}|At the entrance of the procedure, is presented with a screen that has a blue cross.\\ Press the center of the cross until the progress bar has reached completion.| |
| |
|{{sezioni:funzionamento:schermata_touch3_01.png?nolink&400}}|Subito dopo compare una nuova croce di colore verde. Anche in questo caso ripetere l'operazione fino a quando la barra di progressione è completa e viene visualizzata la scritta ''**"COMPLETED"**''.| | |{{sezioni:funzionamento:schermata_touch2_01.png?nolink&400}}|Appears the ''**"COMPLETED"**'' message and and you can release the pressure.\\ \\ \\ \\ \\ //**Note: If the pressure is released before completion of the progress bar, the procedure is aborted and the **// **''<wrap rosso>"!! OPERATION ABORTED !!"</wrap>''** message| |
| |
|{{sezioni:funzionamento:schermata_touch4_01.png?nolink&400}}|Viene quindi proposta un'ultima schermata con una nuova croce di colore ciano. Anche in questo caso ripetere l'operazione fino a quando la barra di progressione è completa e viene visualizzata la scritta ''**"COMPLETED"**''.| | |{{sezioni:funzionamento:schermata_touch3_01.png?nolink&400}}|Thereupon a new Green Cross. Even in this case, repeat until the progress bar is complete and is displayed ''**"COMPLETED"**'' message.| |
| |
=== - Messaggi di errore delle Funzioni di sistema === | |{{sezioni:funzionamento:schermata_touch4_01.png?nolink&400}}|It then proposed a final page with a new cyan colored cross. Even in this case, repeat until the progress bar is complete and is displayed ''**"COMPLETED"**'' message.| |
Quando una funzione di sistema termina con un errore viene visualizzato un messaggio che descrive la causa dell'errore. | |
| |
^Errore/Numero lampeggi led ERR^Messaggio^ | === - Error messages of system functions === |
| |
| When a system function ends with an error displays a message that describes the cause of the error. |
| |
| ^Error/Flashing number ERR led^Message^ |
| **1** |''Generic error''| | | **1** |''Generic error''| |
| **2** |''Open/Exist/Create file error''| | | **2** |''Open/Exist/Create file error''| |
| **19** |''Function not enabled''| | | **19** |''Function not enabled''| |
| |
===== - Informazioni per la programmazione ===== | ===== - Information for programming ===== |
In questo capitolo sono raccolte tutte le informazioni relative al prodotto necessarie durante la programmazione, ovvero durante lo sviluppo di un applicativo QCL. | |
| |
==== - Ambienti di sviluppo ==== | In this section are collected all the product information you need while you are programming, or during development of an application QCL. |
Per la programmazione del prodotto è necessario utilizzare gli ambienti Qview-5 per la programmazione del codice QCL e se il prodotto è equipaggiato di display grafico, anche l'ambiente Qpaint-5 per la progettazione delle pagine grafiche. Ambedue questi software sono contenuti in un pacchetto software che si chiama Qworkbench e che è liberamente scaricabile dal sito Qem (nella sezione download). | |
| |
Per programmare con l'ambiente di sviluppo QPaint-5 è importante selezionare correttamente il target. All'interno dell'ambiente selezionare //Progetto// → //Configurazione del Target// quindi selezionare in accordo con il codice di ordinazione. | ==== - Development softwares ==== |
| |
{{page>lib:mdl:mdl-s-ipmemuti-010}} | For programming the product you should use the Qview-5 for QCL and Qpaint-5 for the design of graphics pages. Both of these software are contained in a software package called Qworkbench and it is freely downloadable from the site Qem (in the download section). |
| |
| For programming with the development software QPaint-5 it is important select the correctly the target. Select //Project// → //Target Configuration// ans select the correctly model. |
| |
| {{page>en:lib:mdl:mdl-s-ipmemuti-010}} |
| |
<html><pagebreak /></html> | <html><pagebreak /></html> |
| |
====== - Accessori disponibili ====== | ====== - Available accessories ====== |
* [[Strumenti:Accessori:IQ009]] | |
* [[Strumenti:Accessori:kit polarizzazione connettori|Kit per la polarizzazione dei connettori]] | * [[en:Strumenti:Accessori:IQ009]] |
* [[Strumenti:Accessori:kit personalizzazione pannello|Kit di personalizzazione del pannello anteriore]] | * [[en:Strumenti:Accessori:kit polarizzazione connettori|Connectors polarization Kit]] |
| * [[en:Strumenti:Accessori:kit personalizzazione pannello|Front panel customization kit]] |
| |