lib:mdl:mdl-s-ipvarsis-010

Differenze

Queste sono le differenze tra la revisione selezionata e la versione attuale della pagina.

Link a questa pagina di confronto

Entrambe le parti precedenti la revisione Revisione precedente
Prossima revisione		 Revisione precedente
Prossima revisioneEntrambe le parti successive la revisione
lib:mdl:mdl-s-ipvarsis-010 [2016/09/12 16:55] – [sys002] qem103lib:mdl:mdl-s-ipvarsis-010 [2016/09/12 16:56] – [sys003] qem103
Linea 3: Linea 3:
 The development environment provides a series of ready-made variables that can be used by putting the word “QMOVE.” before the name. For example “QMOVE.is_suspend”, “QMOVE.sys001”, etc. This paragraph is designed to illustrate the 16 system variables called sys001-sys016, whose meaning depends on the firmware that is being used. The development environment provides a series of ready-made variables that can be used by putting the word “QMOVE.” before the name. For example “QMOVE.is_suspend”, “QMOVE.sys001”, etc. This paragraph is designed to illustrate the 16 system variables called sys001-sys016, whose meaning depends on the firmware that is being used.
  
-== sys001 ==+== - sys001 ==
  
 This is a read only variable that indicates the status of the FUNC (bit 0) and BOOT (bit 1) buttons. The following settings are possible:\\ This is a read only variable that indicates the status of the FUNC (bit 0) and BOOT (bit 1) buttons. The following settings are possible:\\
Linea 16: Linea 16:
  
 NOTE: Some dips are not connected to the microprocessor and is therefore always read at logic level 0. NOTE: Some dips are not connected to the microprocessor and is therefore always read at logic level 0.
-== sys003 == +== - sys003 == 
-Questa variabile permette il comando del led L1-L2-L3-L4. Il bit 0 corrisponde a L1, il bit1 a L2 e così via.+ 
 +This variable allows the command of led's L1-L2-L3-L4. The bit 0 corresponds to L1, the bit1 to L2 and so on.
  
 == sys004 == == sys004 ==
  • Ultima modifica: 2019/08/29 17:01