Differences

This shows you the differences between two versions of the page.

--- en:appnote:an013 [2015/03/06 14:37] – creata qem103
+++ en:appnote:an013 [2019/08/29 17:01] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
+====== AN013 - Battery allarm reset procedure for Q1-CPU-B (modular Qmove). ======
+  *Obtain cable built as shown:
+{{:strumenti:qmove:q1:an013:cavo_prog_rs232.png?nolink&600|}}
+  *The battery should be substitute only with **power on instrument**.
+  *To install the program [[http://www.qemservice.it/download/Prog/Other/ttermp23.zip|"Teraterm Pro"]] after extraction and follow the installation instruction.
+  *Open the "Teraterm Pro".
+  *When you open the following screen appears. To set the COM port.
+{{:strumenti:qmove::q1:an013:1.png?nolink&400}}
+  *Click on "Setup" menù and than select the "Serial port". To set the speed at **19200**.
+  *Put the CPU in boot state, push "RESET" system button and immediately the "BOOT" button.
+  *If the procedure is correct "BOOT" led turn ON.
+  *Open the "Control" menù and select "Macro". From the window of the explorer, to select the file [[http://www.qemservice.it/download/Prog/Other/ver.zip|"ver.ttl"]] after extraction.
+{{:strumenti:qmove::q1:an013:2.png?nolink&400}}
+  *The following screen appears. To select "Yes".
+{{:strumenti:qmove::q1:an013:3.png?nolink&400}}
+  *Set the "data" and then follow the instructions.
+  *The "BATT" led turn OFF.