AN013 - Battery allarm reset procedure for Q1-CPU-B (modular Qmove).
-
Obtain cable built as shown:
-
The battery should be substitute only with power on instrument.
-
To install the program "Teraterm Pro" after extraction and follow the installation instruction.
-
Open the “Teraterm Pro”.
-
When you open the following screen appears. To set the COM port.
-
Click on “Setup” menù and than select the “Serial port”. To set the speed at 19200.
-
Put the CPU in boot state, push “RESET” system button and immediately the “BOOT” button.
-
If the procedure is correct “BOOT” led turn ON.
-
Open the “Control” menù and select “Macro”. From the window of the explorer, to select the file "ver.ttl" after extraction.
-
The following screen appears. To select “Yes”.
-
Set the “data” and then follow the instructions.
-
The “BATT” led turn OFF.