Differences

This shows you the differences between two versions of the page.

--- en:appnote:an019 [2017/05/05 18:07] – created qem103
+++ en:appnote:an019 [2019/10/30 09:15] (current) – qem202
@@ Line 1: / Line 1: @@
+====== AN019 - Procedure for replacing the battery on J1P72F ======
+The purpose of the following document is to describe the procedure for replacing the battery that keeps the calendar active when the instrument is in off.
+===== Release =====
+^ Document release ^ Description ^ Note ^ Date ^
+|  01  | New manual |  |  24/07/2013  |
+==== Warnings ====
+The following operations must be carried out by skilled and formally authorised personnel.\\
+Before touching any electrical parts, the operator will have to discharge its static electricity to the ground.\\
+==== Compatible battery ====
+LITHIUM BATTERY CR2032 BOT 3V
+{{:appnote:an019:an019_9.jpg?100|}}
+{{:appnote:an019:an019_10.jpg?100|}}
+<html><pagebreak /></html>
+==== Procedure for battery replacement ====
+  * Remove the instrument from the electrical panel.
+  * Place the instrument with the front side facing the bench so as to work on the back cover.
+  * The instrument should be placed on a plane that does not smear or damage the front of the instrument touch
+{{:appnote:an019:an019_1.jpg?500|}}
+  * Use a 2mm allen wrench to unscrew the thirteen screws on the back of the instrument.
+{{:appnote:an019:an019_2.jpg?400|}}
+<html><pagebreak /></html>
+{{:appnote:an019:an019_3.jpg?500|}}
+  * Lift the cover.
+{{:appnote:an019:an019_4.jpg?500|}}
+<html><pagebreak /></html>
+  *  Locate the Battery, payng attention to Polarities.
+Rear View
+{{:appnote:an019:an019_11.jpg?600|}}
+\\
+\\
+Side view
+{{:appnote:an019:an019_5.jpg?500|}}
+\\
+\\
+\\
+Top view
+{{:appnote:an019:an019_6.jpg?500|}}
+<html><pagebreak /></html>
+  * Remove the battery in the direction indicated.
+{{:appnote:an019:an019_7.jpg?400|}}
+\\
+\\
+  * Insert the new battery in accordance with the correct polarity.
+{{:appnote:an019:an019_8.jpg?400|}}
+  * Close the instrument, making sure that the cover is properly seated in the appropriate "guides" of the rear frame.
+{{:appnote:an019:an019_3.jpg?500|}}
+  * Screw all 13 screws.
+<html><pagebreak /></html>
+==== Date and time adjustment ====
+By removing the battery with instrument off time and date settings are lost and requires adjustment.\\
+To adjust the date and time:
+  * From the main application page, Called "Process data", press the "F1" key.
+{{:appnote:an019:an019_12.jpg?550|}}
+<html><pagebreak /></html>
+  * You will go to the "Activation Service" page.
+{{:appnote:an019:an019_13.jpg?500|}}
+  * Insert date and time within the specified space
+N.B. When the operation is completed, it is advisable to turn off and turn on the instrument to ensure that the operation was successful.