| |
| en:appnote:an023 [2017/05/08 15:44] – created qem103 | en:appnote:an023 [2019/08/29 17:01] (current) – external edit 127.0.0.1 |
|---|
| | ====== AN023 - Application update procedure with MMC on A1-HMI-QC104 ====== |
| |
| | |{{:varie:logo_qem_documentazione.png?direct&200|}}|||| |
| | ^Document:| **AN023**||| |
| | ^Description:|Application update procedure with MMC on A1-HMI-QC104||| |
| | ^Editor:| Riccardo Furlato||| |
| | ^Approver| Gabriele Bazzi ||| |
| | ^Link:|http://www.qem.eu/doku/doku.php/appnote/an023||| |
| | ^Language:|English||| |
| | | |||| |
| | ^ Document Release ^ Description ^ Note ^ Date ^ |
| | | 01 | New manual |Valid from hardware release 03, and firmware release QC104-xx.5.1| 11/02/2015 | |
| | |
| | |
| | <html><pagebreak /></html> |
| | |
| | ===== Premise ===== |
| | Before execute the application update from MMC there are some premises to be respected: |
| | * The MMC must be formatted with a filesystem type FAT12, FAT16 or FAT32; |
| | * Before copying files to the MMC we recommended to execute the formatting. |
| | * The file should be named as: ''appqtp.bin'' |
| | |
| | ===== Procedure ===== |
| | |
| | - Turn off the instrument. |
| | - Insert the MMC/SD as shown on the serigraphy in the picture (The MMC remains protruding).\\ {{:connettori:connettore_mmc.png?direct&600}} |
| | - Press the **''BOOT''** key {{varie:pulsante_6x6.jpg?nolink&40}} for 3 seconds, or press both the **''F2''** {{tasti:tasto_f2.png?nolink&44}} + **''F4''** {{tasti:f4.png?nolink&40}} + **''F6''** {{tasti:f6.png?nolink&40}} keys to access the **Setup**. |
| | - The following page is showed ''**SETUP**'':\\ {{strumenti:qpanelplus:qpanel_downp1_01.png?direct&450}} |
| | - Press ''**esc**'' {{:strumenti:qpanelplus:virtualkeyboard_esc_01.png?nolink&40}} in the __virtual keyboard__ {{:strumenti:qpanelplus:virtualkeyboard_01.png?250|}} for exit to the ''**DOWNLOAD**'' page\\ {{:strumenti:qpanelplus:qpanelplus_funzioni_sistema_01.png?direct&500}} |
| | - Select ''**SysF**'' from the menu using the arrows {{:strumenti:qpanelplus:virtualkeyboard_sx_01.png?direct&40}} {{:strumenti:qpanelplus:virtualkeyboard_dx_01.png?direct&40}} of the __virtual keyboard__, then press the ''**Enter**'' key {{:strumenti:qpanelplus:virtualkeyboard_enter_01.png?40}}.\\ {{strumenti:qpanelplus:qpanel_sysfp1_01.png?500}} |
| | - Select ''**Upload MMC**'' from the menu using the arrows {{:strumenti:qpanelplus:virtualkeyboard_up_01.png?direct&40}} {{:strumenti:qpanelplus:virtualkeyboard_down_01.png?direct&40}} of the __virtual keyboard__, then press the ''**Enter**'' key {{:strumenti:qpanelplus:virtualkeyboard_enter_01.png?40}} for show the System Functions.\\ {{strumenti:qpanelplus:qpanelplus_funzioni_sistema_02b.png?450}} |
| | - Pressing the **''BOOT''** key {{varie:pulsante_6x6.jpg?40}} or **''F2''** key {{tasti:tasto_f2.png?40}} for per 2 seconds, the selected function to be executed.\\ The {{led:led_lamp.jpg?20}} **POW** led starts flashing to indicate that the selected function is running.\\ {{strumenti:qpanelplus:qpanelplus_funzioni_sistema_04.png?450}}\\ * **a** = indicates that the system function is running.\\ * **b** = running operation.\\ * **c** = percentage of the performed function.\\ {{strumenti:qpanelplus:qpanelplus_funzioni_sistema_05.png?450}}\\ * **d** = Indicates that the function was successful execute. |
| | - By pressing the {{varie:pulsante_6x6.jpg?40}}**FUNC** ot the **''F1''** key {{tasti:tasto_f1.png?40}} the instrument restarts.\\ If the execution of the function is not successful turns off the {{led:led_off.jpg?20}} **POW** LED and starts flashing the {{led:led_lamp.jpg?20}} **ERR** led.\\ {{:strumenti:qpanelplus:qpanelplus_funzioni_sistema_06.png?450}}\\ * **e** = the operation that caused the error.\\ * **f** = indicates the type of error that occurred. |
| | |
| | In this case, repeat the procedure carefully from the beginning and if necessary, contact the Assistance. |