en:appnote:an030

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

en:appnote:an030 [2017/05/11 17:10] – created qem103en:appnote:an030 [2019/08/29 17:01] (current) – external edit 127.0.0.1
Line 1: Line 1:
 +====== AN030 - Application update procedure with MMC for J1-P11 and J1-K31 ======
  
 +|{{:varie:logo_qem_documentazione.png?direct&200|}}||||
 +^Document:| **AN030**|||
 +^Description:|Application update procedure with MMC for J1-P11 and J1-K31|||
 +^Editor:| Riccardo Furlato|||
 +^Approver| Gabriele Bazzi |||
 +^Link:|http://www.qem.eu/doku/doku.php/appnote/an030|||
 +^Language:|English|||
 +| ||||
 +^ Document Release ^ Description ^ Note ^ Date ^
 +|  01  | New manual |FIXME|  27/01/2016  |
 +
 +<html><pagebreak /></html>
 +
 +===== Premise =====
 +
 +Before switching to the application update from MMC there are some premises to be respected:
 +  * The MMC must be formatted with a filesystem type FAT12, FAT16 or FAT32;
 +  * Before copying the files to the MMC, it is recommended that you format it.
 +  * The file must be named as: ''appqtp.bin''
 +
 +===== Procedure =====
 +
 +  - Turn off the instrument.
 +  - Insert the MMC/SD as shown on the screen in the picture (the MMC remains protruding).\\ {{:connettori:connettore_mmc.png?direct&600}}
 +  - Press and hold the  **''F1''** {{tasti:tasto_f1.png?nolink&44}} button to access the **SYSTEM FUNCTIONS**.
 +  - Turn on the instrument.  
 +  - Press the **''F1''** {{tasti:tasto_f1.png?nolink&44}} button until the following screen appears\\ {{:sezioni:funzionamento:schermata_funzione05_01.png?direct&350|}}
 +  - Press the **''BOOT''** {{varie:pulsante_6x6.jpg?40}} button or **''ENTER''** {{:tasti:j1k31:tasto_enter.png?direct&40}} button for 2 seconds to execute the selected function.
 +  - The following screen appears to indicate that the operation is in progress\\ {{:sezioni:funzionamento:schermata_funzione05_02.png?direct&350}}
 +  - A successful operation pops up the message <wrap verde>SUCCESSFUL</wrap> to indicate that the operation is successful.
 +  - If the function fails, the {{led:led_off.jpg?20}} **POW** LED will be switched off and starts flashing the {{led:led_lamp.jpg?20}} **ERR** LED.\\ {{:sezioni:funzionamento:schermata_funzioni5_01.png?direct&480}}\\ <wrap lo>N.B.: In this case, repeat the procedure carefully  from the beginning and if necessary, contact the Assistance.</wrap>
 +  - Press the  **''F1''** {{tasti:tasto_f1.png?nolink&44}} button to restart the system.