en:strumenti:qmoveplus:j1k31:mdu_p1k31fr30-001:connessioni_e_setup

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision		 Previous revision
en:strumenti:qmoveplus:j1k31:mdu_p1k31fr30-001:connessioni_e_setup [2014/12/03 17:39] – qem103en:strumenti:qmoveplus:j1k31:mdu_p1k31fr30-001:connessioni_e_setup [2019/08/29 17:01] (current) – external edit 127.0.0.1
Line 1: Line 1:
 +====== P1K31FR30-001 - 3 axis bridge saw: Connection and setup ======
 +
 +{{  :strumenti:qmoveplus:j1k31:mdu_p1k31fr30-001:pictures:fresa3assi_w.png?direct&550  }}\\ \\ 
 +
 +<html><pagebreak /></html>
 +
 +====== - Information ======
 +
 +===== - Release =====
 +
 +<WRAP center round box 90%>
 +| {{:varie:logo_qem_documentazione.png?200&direct}}                                                                                                                           ||||
 +^ Document                                           | **P1K31FR30-001**                                                                                                       |||
 +^ Description                                        | Connection and setup                                                                                                    |||
 +^ Drawn up                                           |                                                                                                         |||
 +^ Approved                                           | Draft                                                                                                                   |||
 +^ Link:                                              | http://www.qem.eu/doku/doku.php/en/strumenti/qmoveplus/j1k31/mdu_p1k31fr30-001/connessioni_e_setup                      |||
 +^ Languages                                          | English                                                                                                                 |||
 +|                                                                                                                                                                             ||||
 +^ Release                                            ^ Description                                                                                         ^ Notes  ^ Date       ^
 +|  01                                                | New Manual                                                                                          |        |  22/01/15  |
 +
 +</WRAP>
 +<html><pagebreak /></html>
 +
 +
 +----
 +
 +<wrap lo>
 +All rights reserved on this manual. No part of this document can be copied or reproduced in any form without prior written authorisation.
 +QEM does not insure or guarantee its contents and explicitly declines all liability related to the guarantee of its suitability for any purpose. The information in this document can be changed without notice. QEM shall not be held liable for any error or omission in this document.
 +QEM® is a registered trademark.Microsoft® and MS-DOS® are registered trademarks and Windows® is a trademark of Microsoft Corporation.
 +</wrap> 
 +
 +<html><pagebreak /></html>
 +
 +
 +====== - Hardware ======
 +
 +{{  strumenti:QmovePlus:j1k31:j1k31_3d_01.png?direct&400  }}
 +
 +{{  strumenti:qmoveplus:j1k31:j1k31_1mg8f_01.png?nolink&400  }}
 +
 +
 +
 +====== - I/O Resources ======
 +
 +
 +=== Digital Inputs (n. 32) ===
 +
 +  * NO = Normally Opened
 +  * NC = Normally Closed
 +  * PR = Programmable
 +  * I = Impulsive
 +  * C = Continuous
 +
 +|NAME|DESCRIPTION|LOGIC|TERMINAL|HARDWARE|
 +|I 1 |JOG X + |||{{connettori:cnn_12fv_p3.5_02.png?80&nolink}}|CN11.4|J1K31-FR30|
 +|I 2 |JOG X - |||:::|CN11.5|:::|
 +|I 3 |JOG Y + |||:::|CN11.6|:::|
 +|I 4 |JOG Y - |||:::|CN11.7|:::|
 +|I 5 |JOG Z + |||:::|CN11.8|:::|
 +|I 6 |JOG Z - |||:::|CN11.9|:::|
 +|I 7 |Start work cycle|||:::|CN11.10|:::|
 +|I 8 |Stop work cycle|||:::|CN11.11|:::|
 +|I 9 |Enable manual mode|||{{connettori:cnn_12fv_p3.5_02.png?80&nolink}}|CN12.4|J1K31-FR30|
 +|I 10 |Enable automatic mode|||:::|CN12.5|:::|
 +|I 11 |Clear work and all axes|||:::|CN12.6|:::|
 +|I 12 |Fast JOG|||:::|CN12.7|:::|
 +|I 13 |Water pressure OK|||:::|CN12.8|:::|
 +|I 14 |Power system OK|||:::|CN12.9|:::|
 +|I 15 |Not used|||:::|CN12.10|:::|
 +|I 16 |Rotary table down   |||:::|CN12.11|:::|
 +|I 17 |Drives OK|||{{connettori:cnn_12fv_p3.5_02.png?80&nolink}}|CN13.4|J1K31-FR30|
 +|I 18 |Enclosure protection OK |||:::|CN13.5|:::|
 +|I 19 |X limit switch|||:::|CN13.6|:::|
 +|I 20 |Y limit switch|||:::|CN13.7|:::|
 +|I 21 |Z limit switch|||:::|CN13.8|:::|
 +|I 22 |W unlock position 1 ok|||:::|CN13.9|:::|
 +|I 23 |W unlock position 2 ok|||:::|CN13.10|:::|
 +|I 24 |Y parking switch|||:::|CN13.11|:::|
 +|I 25 |Horizontal disk|||:::|CN13.4|:::|
 +|I 26 |Vertical disk|||{{connettori:cnn_12fv_p3.5_02.png?80&nolink}}|CN14.5|J1K31-FR30|
 +|I 27 |X Homing Switch|||:::|CN14.6|:::|
 +|I 28 |Y Homing Switch|||:::|CN14.7|:::|
 +|I 29 |Z Homing Switch|||:::|CN14.8|:::|
 +|I 30 |W Homing Switch|||:::|CN14.9|:::|
 +|I 31 |H Homing Switch|||:::|CN14.10|:::|
 +|I 32 |Spindle speed ok|||:::|CN14.11|:::|
 +
 +FIXME 
 +^  CN11  ^Terminal^Symbol^Description^^Address^
 +|  {{connettori:cnn_12fv_p3.5_02.png?80}}  |  1  |  I01(PNP)  |PNP type fast input I01 |External terminal configuration[(**NPN type fast input configuration**:\\  Terminal 1: connect to 12-24Vdc of the power unit\\  Terminal 2: input\\  **PNP type fast input configuration**:\\  Terminal 1: input\\   Terminal 2: connect to 0V (terminal 3))]|  FREQ1[(can be used as frequency input for a FREQ device, indicating 1 in the device declaration)]  |
 +|:::|  2  |  I01(NPN)  |PNP type fast input I01 |:::|:::|
 +~~REFNOTES~~
 +
 +FIXME 
 +
 +=== - Fast digitali inputs (n. 4) ===
 +|NAME|DESCRIPTION|LOGIC|TERMINAL|HARDWARE|
 +|I33 |Lathe one revolution sensor |||:::|CN11.1|J1K31-FR30|
 +|I34 |Mill inverter on |||:::|CN12.1|:::|
 +|I35 |Disk inverter on |||:::|CN13.1|:::|
 +|I36 |Inverter ok|||:::|CN14.1|:::|
 +
 +
 +
 +=== - Digital outputs (n. 32) ===
 +|NAME|DESCRIPTION|LOGIC|TERMINAL|HARDWARE|
 +|FIXME |Output supply in (12∼28Vdc)|||{{connettori:cnn_11fv_p3.5_02.png?80&nolink}}|CN7.1|J1K31-FR30| 
 +|O1  |Automatic cycle running|||:::|CN7.2|:::|
 +|O2  |Not used|||:::|CN7.3|:::|
 +|O3 |Alarm sound |||:::|CN7.5|:::|
 +|O4 |Rotary table up|||:::|CN7.6|:::|
 +|O5 |Rotary table down|||:::|CN7.8|:::|
 +|O6 |Not used|||:::|CN7.9|:::|
 +|O7 |X enable|||:::|CN7.10|:::|
 +|O8 |Laser 2|||:::|CN7.11|:::|
 +|O9 |Y enable|||:::|CN8.2|:::|
 +|O10 |Y brake|||:::|CN8.3|:::|
 +|O11 |Z enable|||:::|CN8.5|:::|
 +|O12 |Z brake|||:::|CN8.6|:::|
 +|O13 |W enable|||:::|CN8.8|:::|
 +|O14 |W enable reference|||:::|CN8.9|:::|
 +|O15 |W brake|||:::|CN8.10|:::|
 +|O16 |H enable|||:::|CN8.11|:::|
 +|O17 |H enable reference|||:::|CN9.2|:::|
 +|O18 |H brake|||:::|CN9.3|:::|
 +|O19 |Water valve|||:::|CN9.5|:::|
 +|O20 |Laser 1|||:::|CN9.6|:::|
 +|O21 |Reset drives|||:::|CN9.8|:::|
 +|O22 |Not used|||:::|CN9.9|:::|
 +|O23 |End of automatic work|||:::|CN9.10|:::|
 +|O24 |Machine OK|||:::|CN9.11|:::|
 +|O25 |Mill inverter enable|||:::|CN10.2|:::|
 +|O26 |Disk inverter enable|||:::|CN10.3|:::|
 +|O27 |Open enclosure protection|||:::|CN10.5|:::|
 +|O28 |Not used|||:::|CN10.6|:::|
 +|O29 |W lock position 1 ON|||:::|CN10.8|:::|
 +|O30 |W lock position 2 ON|||:::|CN10.9|:::|
 +|O31 |H lock position 1 ON|||:::|CN10.10|:::|
 +|O32 |H lock position 2 ON|||:::|CN10.11|:::|
 +
 +
 +
 +=== Two-way encoder count inputs (n° 8) ===
 +|NAME|DESCRIPTION|LOGIC|TERMINAL|HARDWARE|
 +|CNT01 – PHA|X position|||{{connettori:cnn_2x7f_p3.5_01.png?80&nolink}}|CN15.2B|J1K31-FR30|
 +|CNT01 – PHB|||:::|CN15.3B|
 +|CNT02 – PHA|Y position|||:::|CN16 |J1K31-FR30|
 +|CNT02 – PHB|||:::|CN16 |
 +|CNT03 – PHA|Z position|||:::|CN17 |J1K31-FR30|
 +|CNT03 – PHB|||:::|CN17 |
 +|CNT04 – PHA|W position|||:::|CN18 |J1K31-FR30|
 +|CNT04 – PHB|||:::|CN18 |
 +|CNT05 – PHA|H position|||:::|CN19 |J1K31-FR30|
 +|CNT05 – PHB|||:::|CN19 |
 +|CNT06 – PHA|Digital potentiometer work speed|||:::|CN20 |J1K31-FR30|
 +|CNT06 – PHB|||:::|CN20 |
 +|CNT07 (*)|Not used|||:::|CN21 |J1K31-FR30|
 +|CNT08 (*)|Not used|||:::|CN22 |J1K31-FR30|
 +|(*) Not available in FR hardware version ||
 +
 +FIXME 
 +^  CN13  ^Morsetto^Simbolo^Descrizione^^  Indirizzo  ^^
 +|  {{connettori:cnn_2x7f_p3.5_01.png?nolink&80}}  |  1A  | | Internal bridge 1A -1B ||||
 +|:::|  2A  |  PHA1  | Fase A  conteggio 1 | PNP Push-Pull[(**Configurazione conteggio di tipo PNP/Push-Pull**:\\ Morsetto 5B: collegare al morsetto 5A\\ Morsetto 6B: collegare al morsetto 6A\\ Morsetto 7B: collegare al morsetto 7A)] |3.INP25|3.CNT01|
 +|:::|  3A  |  PHB1  |Fase B  conteggio 1 |:::|3.INP26|:::|
 +|:::|  4A  |  Z1  |Z conteggio 1|:::|  1.INT01  ||
 +|:::|  5A  |  0V  |Comune degli ingressi di conteggio||||
 +|:::|  6A  |  0V  |:::||||
 +|:::|  7A  |  0V  |:::||||
 +|:::|  1B  |    |Internal bridge 1A -1B||||
 +|:::|  2B  |  PHA1+  |+ PHA  conteggio 1|  Line Driver  |3.INP25|  3.CNT01  |
 +|:::|  3B  |  PHB1+  |+ PHB  conteggio 1|:::|3.INP26|:::|
 +|:::|  4B  |  Z1+  |+ Z conteggio 1|:::|  1.INT01  ||
 +|:::|  5B  |  PHA1-  |- PHA  conteggio 1|:::|:::||
 +|:::|  6B  |  PHB1-  |- PHB  conteggio 1|:::|:::||
 +|:::|  7B  |  Z1-  |- Z conteggio 1|:::|:::||
 +~~REFNOTES~~
 +FIXME 
 +
 +=== Analog inputs (n. 4) ===
 +|NAME|DESCRIPTION|LOGIC|TERMINAL|HARDWARE|
 +|IA1|X speed potentiometer|||{{connettori:cnn_9fv_p3.5_02.png?80&nolink}}|CN28.2|J1K31-FR30|
 +|IA2|X backward speed potentiometer|||:::|CN28.6|J1K31-FR30|
 +|IA3|Spindle current reading|||:::|CN29.2|J1K31-FR30|
 +|IA4|Spindle rpm reading|||:::|CN29.6|J1K31-FR30|
 +
 +FIXME 
 +||  1  |  GAI  |Comune ingressi analogici|    |
 +|:::|  2  |  IA1  |Ingresso analogico 1|  3.AI01  |
 +|:::|  3  |  SEL1V  |Selettore ingresso analogico 1 voltmetrico 0÷10V[(Collegando questo morsetto a GAI, l'ingresso funziona come voltmetrico 0÷10V)]| |
 +|:::|  4  |  SEL1C  |Selettore ingresso analogico 1 amperometrico 0÷20mA[(Collegando questo morsetto a GAI, l'ingresso funziona come  amperometrico 0÷20mA)]| |
 +|:::|  5  |  GAI  |Comune ingressi analogici| |
 +|:::|  6  |  IA2  |Ingresso analogico 2|  3.AI02  |
 +|:::|  7  |  SEL2V  |Selettore ingresso analogico 2 voltmetrico 0÷10V[(#1)]| |
 +|:::|  8  |  SEL2C  |Selettore ingresso analogico 2 amperometrico [(#2)]| |
 +|:::|  9  |  VREF  |Tensione di riferimento| |
 +FIXME 
 +
 +=== Analog outputs (n. 8) ===
 +|NAME|DESCRIPTION|LOGIC|TERMINAL|HARDWARE|
 +|  GAO  |Common for analog outputs|CN26.1|:::|
 +|AO1|X Speed +/-10V command|||{{connettori:cnn_6fv_p3.5_02.png?nolink&70}}|CN26.2|J1K31-FR30|
 +|AO2|Y Speed +/-10V command|||:::|CN26.3|:::|
 +|AO3|Z Speed +/-10V command|||:::|CN26.5|:::|
 +|AO4|W Speed +/-10V command|||:::|CN26.6|:::|
 +|AO5|H Speed +/-10V command|||:::|CN27|:::|
 +|AO6|Spindle rotation speed set |||:::|CN27|:::|
 +|AO7 (*)|Not used|||:::|CN27|:::|
 +|AO8 (*)|Not used|||:::|CN27|:::|
 +|(*) Not available in FR hardware version ||
 +
 +
 +<html><pagebreak /></html>
 +