Copyright © 1995-2014 QEM srl Tutti i diritti riservati.

Il copyright di questo manuale è riservato. Non copiare e non riprodurre alcuna parte di questo documento, in qualsiasi forma, senza la preventiva autorizzazione scritta di QEM. QEM non fornisce alcuna garanzia sui contenuti e, in particolare, declina ogni responsabilità per quanto concerne la garanzia di adeguatezza in caso di finalità operative speciali. Le informazioni contenute in questo documento possono essere modificate senza preavviso. QEM declina ogni responsabilità in caso di errori contenuti in questo documento. Marchi registrati:

- QEM® è un marchio registrato.

IL SOFTWARE PROFILEIMPORTER 8 VIENE FORNITO DALL'AUTORE “COSÌ COM'È” E QUALSIASI GARANZIA ESPRESSA O IMPLICITA, INCLUSE, A TITOLO ESEMPLIFICATIVO, LE GARANZIE IMPLICITE DI COMMERCIABILITÀ E IDONEITÀ PER UNO SCOPO PARTICOLARE VIENE ESCLUSA. IN NESSUN CASO L'AUTORE SARÀ RESPONSABILE PER EVENTUALI DANNI DIRETTI, INDIRETTI, ACCIDENTALI, SPECIALI, ESEMPLARI O CONSEQUENZIALI (INCLUSI, MA NON LIMITATI A, APPALTI DI BENI O SERVIZI SOSTITUTIVI; PERDITA DI UTILIZZO, DATI O PROFITTI; O INTERRUZIONE DELL'ATTIVITÀ ) COMUNQUE CAUSATA E SU QUALSIASI TEORIA DI RESPONSABILITÀ, SIA CONTRATTUALE, OGNI RESPONSABILITÀ O ILLECITO (COMPRESO NEGLIGENZA O ALTRO) DERIVANTE IN QUALSIASI MODO DALL'UTILIZZO DI QUESTO SOFTWARE, ANCHE SE AVVISATO DELLA POSSIBILITÀ DI TALE DANNO.

Questo documento è completamente valido errori e omissioni salvo.

Questo documento contiene informazioni sull'installazione e l'uso di Profile Importer 8. Questa applicazione consente l'importazione di geometrie 2D e profili da file DXF. I dati del disegno vengono quindi trasferiti all'applicazione o salvati in un file .CSV.

ProfilleImporter-8 is deliver with a installation CD. To install insert the CD into CDROM reader (if autoplay function is active) or start manually the “ProfileImporter-8.1.3.exe” file. This start an installation wizard that guide into installation procedure. Here are the installation screenshots:

Welcome to profileimporter installation

Profileimporter license agreement

Select installation folder

Select components

In the “Select components” screen it is possible to select if install the License key RunTime. If you have already installed this software please deselect this components (select “Custom installation” (red pointer) and disable “License key Runtime” (green pointer).

Also it is possible to select if install the Qem Resource Manager. If you have already installed this software please deselect this components (select “Custom installation” (red pointer) and disable “Qem Resource Manager” (green pointer). Qem Resource Manager can be installed also by Qworkbench installation.

Select menu name

Now if you have selected the installation of “License key RunTime” the process follow as:

Welcome to runtime installation

Runtime license agreement

Install drivers

Could also happen that the operational system asks more times the user to decide if proceed with the installation of driver that have not overcome the certification “Windows Logo”. In this case you always choose “Continue”. The panel with the question is:

End of runtime installation

Now if you have selected the installation of “Qem Resource Manager” the process follow with:

In the last view, click Install to start the installation. The next viewings will be:

Once the installation is complete the QRM will start automatically (as described in the last picture).

Now the installation is completed:

End of profileimporter installation

Access to all the program features is subject to the presence of an USB security key, supplied with the installation program.

The absence of such key may affect the complete execution of export procedures and may be notified by a message upon ProfileImporter startup.

License error

The user may obtain more information on the installed licences and the USB security key by accessing the “License Info” menu.

License information

The user also may obtain other license information opening the “http://localhost:1947” page into pc browser (i.e. Internet explorer).

Placed into installation folder there is the ”SYMBOLS.SYM” file that is used only with serial/ethernet transfer. This file must be the same used to develop qmove application. If the file into the profileimporter8 installation folder is outdate please update it (keep the same name ”SYMBOLS.SYM”).

QEM Resources Manager (QRM) is a software service programs that allows profileimporter to communicate with a control Qmove. Communication could be done using serial com or ethernet. Communication parameter (baud rate, IP address) must be set editing resource settings in Qem Resource Manager.

For more information about QRM see document mdu_resourcemanager.

The ProfileImporter-8 program allow to perform two operations “Importing a Profile” and “Importing 2D geometries” that are following described:

Only vertical cutter profiles may be imported by ProfileImporter. Profiles may not contain undercuts. Profile Importer will attempt to correct the geometry, if possible. The profile may be transformed into a symmetrical horizontal cutter profile from within the application (if it is supported by target application). The import process follows these four steps

• DXF file selection
• Drawing Preview
• Drawing processing
• Save to file and/or .CSV.

First of all check if dxf file satisfy the features listed in chapter DXF Requirements.
DXF File selection may be performed either by entering the absolute pathname in the text box, or by pressing the “Browse…” button and navigating to the correct file.
The file is then acquired by pressing the “Load” button.

DXF file selection

The file contents are displayed, in order to obtain immediate profile recognition and to exhibit profile details. Zooming within the drawing may be performed either with the mouse wheel or by right-clicking and moving the mouse within the drawing area. This function is useful for spotting processing errors, as performed by the following step.

Dxf file preview

The main import step converts DXF information into a format understood by the QMOVE application. A workable profile must have the following features:

• The profile does not exhibit undercuts
• Every segment except the first begins where the previous segment ends.
• Every segment is monotonic (either ascending or descending)
• Every segment lies on the YZ plane

By clicking on the “Process” button, the drawing shall be processed in order to satisfy the above conditions. Whenever necessary (and possible) this step shall modify the original drawings taking tolerances into account. Drawing tolerances shall be user-defined the chapter Options.

Drawing processing

The processed results may be transferred in either of two ways:

1. by saving the results to a local .CSV file. Subsequently the file may be transferred to the machine's internal memory by means of an MMC card. The user is advised to enter the full pathname.
2. by downloading the profile to the machine's internal memory via serial port or ethernet.

In order to allow MMC file transfer, the file must be named with a number between 0 and 99999999 (i.e. 1234.csv), and it must reside in a directory named 'DS' i.e. “G:\DS\1234.csv”.

Save to file and/or CSV

Mode 2 is only allowed when the application is in programming mode, otherwise the download will stop.

Download the geometries to Qmove control through the resources provided by the QRM connection (serial or Ethernet).

• Select Enable Send to Target.
• Click su Resurce ID and choose one of the list resources

.

To configure the resources that the PC and the network to which the PC is connected, you must act provides software QRM you have to click twice on to start the interface of the QRM.

• Use the machine HMI to display the page prepared to receive the datas..
• Click on Execute to execute.

A program description may be entered (up to 12 characters) in the machine's internal memory.

The Profile Importer application is capable of importing geometries for the purpose of 2D work program definition. 2D geometry import follows these steps:

• DXF file selection.
• Drawing Preview.
• Drawing processing.
• Save to file and/or .CSV.

First of all check if DXF file satisfy the features listed in chapter DXF Requirements.
DXF File selection may be performed either by entering the absolute pathname in the text box, or by pressing the “Browse” button and navigating to the correct file.
The file is then acquired by pressing the “Load” button.

DXF file selection

The contents of the preceding step are displayed, to provide immediate geometry recognition and to exhibit drawing detail. Zooming within the drawing may be performed either with the mouse wheel or by right-clicking and moving the mouse within the drawing area.

Drawing Preview

N.B.: The possibility to transfer to the target segment type arc must be verified with the features of the Qmove application. Some applications allow the elaboration only of linear lines.

The imported geometry may be composed of lines and arc. In this phase these elements are grouped in consecutive segments, as these geometries are suitable for the QMOVE application.

Drawing processing

The drawing process step use the 'Arc Tolerance' parameter that is user defined in the chapter Options.

The processed results may be transferred in either of two ways:

1. by saving the results to a local .CSV file. Subsequently the file may be transferred to the machine's internal memory by means of an MMC card. The user is advised to enter the full pathname.
2. by downloading the profile to the machine's internal memory via serial port or ethernet.

In order to allow MMC file transfer, the file must be named with a number between 0 and 99999999 (i.e. 1234.csv), and it must reside in a directory named 'DS' i.e. “G:\DS\1234.csv”.

Save to file and/or CSV

Mode 2 is only allowed when the application is in programming mode, otherwise the download will stop.

Download the geometries to Qmove control through the resources provided by the QRM connection (serial or Ethernet).

• Select Enable Send to Target.
• Click su Resurce ID and choose one of the list resources

.

To configure the resources that the PC and the network to which the PC is connected, you must act provides software QRM you have to click twice on to start the interface of the QRM.

• Use the machine HMI to display the page prepared to receive the datas..
• Click on Execute to execute.

A program description may be entered (up to 12 characters) in the machine's internal memory.

Options panel could be opened pressing Option button in the main screen.

Options

• Working type: Profile Importer 8 allows import either Profiles of Geometry, and either option may be disabled. If both are enabled, processing operations may be selected during the parameter input phase.
• Scale factor: the drawing may be scaled to match the machine units. Defined that draw units is mm the scale factor is used when the least significant machine numeral is different from draw unit (mm). If the machine have tenth mm as least significant numeral then input 10/1. If the machine have cent mm as least significant numeral

then input 100/1.

• Edge Tolerance. The endpoint of any segment and the starting point of the consecutive segment must lie no farther than a specified tolerance. If the drawing satisfies this condition, the two segments are joined at their common point.
• Arc Tolerance: if an arc is not monotonic, it is subdivided into two segments, each of which is monotonic. An arc is monotonic if no line through the centre intersects the arc.
• Radius Tolerance: the minimum arc radius is calculated so as to not perform undercutting.

N.B Edge Tolerance, Arc Tolerance e Radius Tolerance are in dxf draw unit (mm).

DXF files must be version 12 or higher, in ASCII or binary format. The allowed entities are LINE, CIRCLE, RECTANGLE, ELLIPSE, SPLINE, POLYLINE, LWPOLINE and ARC.
Groups are not supported.
Data from a single layer may be extracted. If drawing has more than one layer, Profile Importer will prompt the user for the layer number at import time.
DXF files must have mm as integer unit.

In installation folder there is a Qmove sample application. It is a minimal application that can communicate with ProfileImporter. To modify and compile it you need the design environment Qworkbench that is free to download from Qem web site (www.qem.it)