SW1 | Dip | Impostazione dei DIP | Funzione | |||
---|---|---|---|---|---|---|
1 | OFF | OFF | ON | ON | Selezione velocità di trasmissione PROG PORT | |
2 | OFF | ON | OFF | ON | ||
Baud-rate 38400 | Baud-rate 115200 | Baud-rate 19200 | Baud-rate 57600 |
|||
3 | OFF | OFF | ON | ON | Selezione velocità di trasmissione USER PORT | |
4 | OFF | ON | OFF | ON | ||
Baud-rate 38400 | Baud-rate 115200 | Baud-rate 19200 | Baud-rate 57600 |
|||
5 | Selettore baud-rate CANbus. Vedere paragrafo Selettore baud-rate CANbus | |||||
6 | OFF | ON | Selezione modo di funzionamento PROG PORT | |||
PROG PORT utilizzabile anche dai device SERCOM e MODBUS | PROG PORT non utilizzabile dai device SERCOM e MODBUS | |||||
7 | Selettore baud-rate CANbus. Vedere paragrafo Selettore baud-rate CANbus | |||||
8 | OFF | ON | Seleziona la USER PORT come PROG PORT1) | |||
PROG PORT normale | PROG PORT sul connettore della USER PORT |
1)
E' possibile usare il connettore della USER PORT come PROG PORT con standard elettrico RS232, così facendo il connettore mini-USB della PROG PORT viene scollegato (Settaggio standard elettrico USER PORT). Per questo funzionamento è necessario anche che il dip 6 di SW2 sia OFF.