SW1 | Dip | DIP settings | Function | |||
---|---|---|---|---|---|---|
1 | OFF | OFF | ON | ON | Select PROG PORT transmission speed | |
2 | OFF | ON | OFF | ON | ||
Baud-rate 38400 | Baud-rate 115200 | Baud-rate 19200 | Baud-rate 57600 |
|||
3 | OFF | OFF | ON | ON | Select USER PORT transmission speed | |
4 | OFF | ON | OFF | ON | ||
Baud-rate 38400 | Baud-rate 115200 | Baud-rate 19200 | Baud-rate 57600 |
|||
5 | CANbus baud-rate selector. See paragraph CANbus baud-rate selector | |||||
6 | OFF | ON | Select PROG PORT functioning mode | |||
PROG PORT can also be used by SERCOM and MODBUS devices | PROG PORT cannot be used by SERCOM and MODBUS devices | |||||
7 | CANbus baud-rate selector. See paragraph CANbus baud-rate selector | |||||
8 | OFF | ON | Select the USER PORT as PROG PORT1) | |||
PROG PORT normal | PROG PORT on USER PORT connector |
1)
It is possible to use the USER PORT connector as PROG PORT with RS232 electric standard, doing this the mini-USB connector of the PROG PORT is disconnected (Setting USER PORT electric standard). For this function mode also set dip 6 of SW2 to OFF.