This is an old revision of the document!
The USB mini-B connector does not support USB electrical standards, it can only be used with an interface IQ009 or IQ013.
It is used for the transfer and debugging of the application program in the CPU.
| Electrical standard | TTL (Use serial interface IQ009 or IQ013) |
|---|---|
| Communication speed | Min. 9.6 Kbaud - max 115200 Kbaud settable by dip1 and 2 of the switch SW1 |
| Insulation | None |
 |  |  |
| Connection between Qmove+ e PC using the accessory IQ009 | ||
|  |  Device with RS232 |
| Connection between Qmove+ and a device fitted with a RS232 serial port (e.g. a MODEM), using the interface IQ013 | ||