This is an old revision of the document!
AN028 - Firmware upgrade procedure with USB on MQ5CF
Document: | AN028 | ||
---|---|---|---|
Description: | Firmware upgrade procedure with USB on MQ5CF | ||
Editor: | Davide Mocellin | ||
Approver | Giuliano Tognon | ||
Link: | http://www.qem.eu/doku/doku.php/appnote/an028 | ||
Language: | English | ||
Document Release | Description | Note | Date |
01 | New manual | 09/10/2015 |
Introduction
This procedure allows the firmware update, Via the USB port on the back of the MQ5CF controller.
ATTENTION: The firmware upgrade operation is particularly dangerous if it does not run properly, because it could make damage to the instrument. |
---|
===== Premise =====.
Copy in the root (main folder) of the USB of upgrading, the FIRMWARE.a21 file.
Procedura
-
Spegnere lo strumento.
-
Accendere il MQ5CF tenendo premuto il pulsante
FUNC
sul retro del prodotto. -
Per eseguire la funzione tenere premuto per 2 secondi il tasto
F7
oppure il pulsanteBOOT
sul retro.
Il nuovo applicativo è caricato e la procedura è conclusa.
Note
L'aggiornamento del firmware può essere fatto alternativamente attraverso un apposito programma collegando il MQ5CF con il cavo IQ009 sulla porta mini-usb PROG presente sul retro.