AN028 - Firmware upgrade procedure with USB on MQ5CF
Document: | AN028 | ||
---|---|---|---|
Description: | Firmware upgrade procedure with USB on MQ5CF | ||
Editor: | Davide Mocellin | ||
Approver | Giuliano Tognon | ||
Link: | http://www.qem.eu/doku/doku.php/appnote/an028 | ||
Language: | English | ||
Document Release | Description | Note | Date |
01 | New manual | 09/10/2015 |
Introduction
This procedure allows the firmware update, Via the USB port on the back of the MQ5CF controller.
ATTENTION: The firmware upgrade operation is particularly dangerous if it does not run properly, because it could make damage to the instrument. |
---|
===== Premise =====.
Copy in the root (main folder) of the USB of upgrading, the FIRMWARE.a21 file.
Procedure
-
Turn off the instrument.
-
Turn on the MQ5CF by holding down the
FUNC
button on the back of the instrument. -
To execute the function press and hold for 2 seconds the
F7
button or theBOOT
button on the back.
The new application is loaded and the procedure is completed.
Note
The firmware update can be done alternately through a special program connecting the MQ5CF with IQ009 interface on the mini-usb PROG port on the back side.