 | The cabling must be carried out by specialist personnel and fitted with suitable anti-static precautions. Before handling the controller, disconnect the power and all parts connected to it. To guarantee compliance with EC regulations, the power supply must have a galvanic isolation of at least 1500Vac. |
|---|
.
| Power supply | 24 Vdc |
|---|---|
| Voltage range | 22 - 27 Vdc |
| Max. absorption | 30W |
Connector
| CN1 | Terminal | Symbol | Description | |
|---|---|---|---|---|
 |  | 1 | + | DC power positive |
| 2 | GROUND | Gnd-PE (signals) | ||
| 3 | - | DC power 0V | ||
Connection examples
| Use an isolated power unit with 24Vdc +/-5% output conform to EN60950-1. |
|---|
.
 | Use two separate power units: one for the control circuit and one for the power circuit |
 | For a single power unit, use two separate lines: one for the control and one for the power |
 | DO NOT use the same lines for the power circuit and the controller |