The wiring must be installed by skilled personnel with appropriate antistatic measures. Before use the device, disconnect the power supply. To ensure compliance with CE regulations, the power supply must have 1500 Vac galvanic insulation minimum. |
---|
.
Power supply available | 24 Vdc |
---|---|
Valid range | 22 ÷ 27 Vdc |
Maximum absorbtion | 30W |
Connector
CN1 | Terminal | Simbol | Description | |
---|---|---|---|---|
1 | 0V DC power supply | |||
2 | GROUND | Ground-PE (signals) | ||
3 | +24V DC power supply |
Connection examples
It requires the use of an insulated power supply with 24Vdc +/-5% output in compliance with EN60950-1. |
---|
.
You use two separate power supplies: one for the control part and one for the power part | |
In the case of the single power supply, you use two separate lines: one for the control part and one for the power part | |
Do not use the same power line |