AN025 - Application's update procedure with MMC/SD on R401
Document | AN025 | ||
---|---|---|---|
Description | Application's update procedure with MMC/SD on R401 | ||
Drawn up | Omar Sbalchiero | ||
Approved | Gabriele Bazzi | ||
Link | http://www.qem.eu/doku/doku.php/en/appnote/an025 | ||
Language | Italiano | ||
Document Release | Description | Note | Date |
01 | New manual | 13/02/2015 |
Premise
Before updating the application from MMC there are some conditions to be fulfilled:
-
The MMC must be formatted with filesystem type FAT12, FAT16 or FAT32;
-
Before you copy the files in MMC format it is recommended.
-
The file must be nominated:
applic.bin
Procedure
-
Format MMC/SD card
-
Copy the files sent into the SD/MMC card
-
Please wait about 3 minutes till the deactivation of L1 and L3 led, then wait for activation of POWER and RUN led
-
Power Down. Pull out the MMC/SD. Power Up the PLC