en:lib:mdl:mdl-f-eccan-010

This translation is older than the original page and might be outdated. See what has changed.

Esempio di collegamento dei moduli remotati al controllore

:important:On the first (1) and on the last (3) device of the chain, the termination resistances must be inserted.
The cable shoes must be connected to ground by the fastons provided on the metal body.

.

:info:To activate the internal termination resistance see paragraph Setup of CAN1 and CAN2 PORT Termination resistances

CANbus connection example

:important:Caution: close the DIP JP1 and JP2 and insert the terminating resistors (RL, RH) on the last device in the chain.
  • Last modified: 2019/08/29 17:01